The operator shall use the following formula:
Actual fuel consumption for each flight [t] = Amount of fuel contained in aircraft tanks once fuel uplift for the flight is complete [t] – Amount of fuel contained in aircraft tanks once fuel uplift for subsequent flight is complete [t] + Fuel uplift for that subsequent flight [t]
Where there is no fuel uplift for the flight or subsequent flight, the amount of fuel contained in aircraft tanks shall be determined at block-off for the flight or subsequent flight. In the exceptional case that an aircraft performs activities other than a flight, including undergoing major maintenance involving the emptying of the tanks, after the flight for which fuel consumption is being monitored, the aircraft operator may substitute the quantity ‘Amount of fuel contained in aircraft tanks once fuel uplift for subsequent flight is complete + Fuel uplift for that subsequent flight’ with the ‘Amount of fuel remaining in tanks at the start of the subsequent activity of the aircraft’, as recorded by technical logs.
The operator shall use the following formula:
Actual fuel consumption for each flight [t] = Amount of fuel remaining in aircraft tanks at block-on at the end of the previous flight [t] + Fuel uplift for the flight [t] - Amount of fuel contained in tanks at block-on at the end of the flight [t]
The moment of block-on may be considered equivalent to the moment of engine shut down. Where an aircraft does not perform a flight previous to the flight for which fuel consumption is being monitored, the aircraft operator may substitute the quantity ‘Amount of fuel remaining in aircraft tanks at block-on at the end of the previous flight’ with the ‘Amount of fuel remaining in aircraft tanks at the end of the previous activity of the aircraft’, as recorded by technical logs.