Commission Regulation (EU) No 601/2012 (repealed)Show full title

D. Flares U.K.

When calculating emissions from flares the operator shall include routine flaring and operational flaring (trips, start-up and shutdown as well as emergency relieves). The operator shall also include inherent CO₂ in accordance with Article 48.

By way of derogation from section 2.1 of Annex II, tiers 1 and 2b for the emission factor shall be defined as follows:

Tier 1

:

The operator shall use a reference emission factor of 0,00393 t CO₂/Nm³ derived from the combustion of pure ethane used as a conservative proxy for flare gases.

Tier 2b

:

Installation-specific emission factors shall be derived from an estimate of the molecular weight of the flare stream, using process modelling based on industry standard models. By considering the relative proportions and the molecular weights of each of the contributing streams, a weighted annual average figure shall be derived for the molecular weight of the flare gas.

By way of derogation from section 2.3 of Annex II, only tiers 1 and 2 shall be applied for the oxidation factor in the case of flares.