The operator shall add CO2 emissions, from bypass dust or cement kiln dust (CKD) leaving the kiln system, corrected for a partial calcination ratio of CKD calculated as process emissions in accordance with Article 24(2). By way of derogation from section 4 of Annex II, tiers 1 and 2 for the emission factor shall be defined as follows:
:
The operator shall apply an emission factor of 0,525 t CO2/t dust.
:
The operator shall determine the emission factor (EF) at least once annually following Articles 32 to 35 and using the following formula:
Where:
=
Emission factor of partially calcined cement kiln dust [t CO2/t CKD];
=
Installation-specific emission factor of clinker [t CO2/t clinker];
=
Degree of CKD calcination (released CO2 as % of total carbonate CO2 in the raw mix).
Tier 3 for the emission factor is not applicable.