CHAPTER IIIMONITORING OF EMISSIONS OF STATIONARY INSTALLATIONS

SECTION 1General provisions

Article 20Monitoring boundaries

1

An operator shall define the monitoring boundaries for each installation.

Within those boundaries, the operator shall include all relevant greenhouse gas emissions from all emission sources and source streams belonging to activities carried out at the installation and listed in Annex I to Directive 2003/87/EC, as well as from activities and greenhouse gases included by a Member State pursuant to Article 24 of Directive 2003/87/EC.

The operator shall also include emissions from regular operations and abnormal events including start-up and shut-down and emergency situations over the reporting period, with the exception of emissions from mobile machinery for transportation purposes.

2

When defining the monitoring and reporting process, the operator shall include the sector specific requirements laid down in Annex IV.

3

Where leakages from a storage complex pursuant to Directive 2009/31/EC are identified and lead to emissions, or release of CO2 to the water column, they shall be considered as emission sources for the respective installation and shall be monitored in accordance with section 23 of Annex IV to this Regulation.

The competent authority may allow the exclusion of a leakage emission source from the monitoring and reporting process, once corrective measures pursuant to Article 16 of Directive 2009/31/EC have been taken and emissions or release into the water column from that leakage can no longer be detected.