1.Each aircraft operator shall determine the annual CO2 emissions from aviation activities by multiplying the annual consumption of each fuel expressed in tonnes by the respective emission factor.
2.Each aircraft operator shall determine the fuel consumption for each flight and for each fuel, including fuel consumed by the auxiliary power unit. For that purpose, the aircraft operator shall use one of the methods laid down in section 1 of Annex III. The aircraft operator shall choose the method which provides for the most complete and timely data combined with the lowest uncertainty without incurring unreasonable costs.
3.Each aircraft operator shall determine the fuel uplift referred to in section 1 of Annex III based on one of the following:
(a)the measurement by the fuel supplier, as documented in the fuel delivery notes or invoices for each flight;
(b)data from aircraft onboard measurement systems recorded in the mass and balance documentation, in the aircraft technical log or transmitted electronically from the aircraft to the aircraft operator.
4.The aircraft operator shall determine fuel contained in the tank using data from aircraft onboard measurement systems and recorded in the mass and balance documentation, in the aircraft technical log or transmit it electronically from the aircraft to the aircraft operator.
F15.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[F26. Where the amount of fuel uplift or the amount of fuel remaining in the tanks is determined in units of volume, expressed in litres, the aircraft operator shall convert that amount from volume to mass by using density values. The aircraft operator shall use the fuel density (which may be an actual or a standard value of 0,8 kg per litre) that is used for operational and safety reasons.
The procedure for informing the use of actual or standard density shall be described in the monitoring plan along with a reference to the relevant aircraft operator documentation.]
[F27. For the purposes of the calculation referred to in paragraph 1, the aircraft operator shall use the default emission factors set out in Table 2 in Annex III. For fuels not listed in that table, the aircraft operator shall determine the emission factor in accordance with Article 32. For such fuels, the net calorific value shall be determined and reported as a memo-item.]
8.By way of derogation from paragraph 7, the aircraft operator may, upon approval by the competent authority, derive the emission factor or the carbon content, on which it is based, or the net calorific value for commercially traded fuels from the purchasing records for the respective fuel provided by the fuel supplier, provided that those have been derived based on internationally accepted standards and the emission factors listed in Table 2 in Annex III cannot be applied.
Textual Amendments
F1 Deleted by Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance).
F2 Substituted by Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (Text with EEA relevance).