Search Legislation

The Plant Health (Forestry) Order 2005

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes to legislation:

There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Plant Health (Forestry) Order 2005. Any changes that have already been made by the team appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Schedule 4 Part A:

Changes and effects yet to be applied to the whole Instrument associated Parts and Chapters:

Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):

  • Sch. 1A amendment by S.I. 2014/2420, art. 18 extended to W. by S.I. 2015/1723 art. 2(t)
  • Sch. 1A inserted by S.I. 2014/2420 art. 18
  • Sch. 1A substituted by S.I. 2019/498 art. 12
  • Sch. 1A Table word inserted by S.I. 2017/1178 art. 8(a)
  • Sch. 1A Table words substituted by S.I. 2017/1178 art. 8(b)
  • Sch. 1A Table words substituted by S.I. 2018/1048 art. 8
  • Sch. 1A Table words substituted by S.I. 2015/1723 art. 4(2)
  • Sch. 2 Table Pt. A Table item 10 omitted by S.I. 2019/1075 art. 6(a)
  • Sch. 5 Pt. A para. 1B Sch. 5 Pt. A para. 1a renumbered as Sch. 5 Pt. A para. 1B by S.I. 2016/1167 art. 13(b)
  • Sch. 5 Pt. A para. 1C Sch. 5 Pt. A para. 1b renumbered as Sch. 5 Pt. A para. 1C by S.I. 2016/1167 art. 13(b)
  • Sch. 5 Pt. A para. 1D Sch. 5 Pt. A para. 1c renumbered as Sch. 5 Pt. A para. 1D by S.I. 2016/1167 art. 13(b)
  • Sch. 5 Pt. A para. 1B Sch. 5 para. 1a renumbered as Sch. 5 para. 1B by S.I. 2019/498 art. 18(b)
  • Sch. 5 Pt. A para. 1C Sch. 5 para. 1b renumbered as Sch. 5 para. 1C by S.I. 2019/498 art. 18(b)
  • Sch. 5 Pt. A para. 1D Sch. 5 para. 1c renumbered as Sch. 5 para. 1D by S.I. 2019/498 art. 18(b)
  • sch. 5 Pt. A para. 4(a)(ix) inserted by S.S.I. 2019/278 art. 9(c)(iv)
  • sch. 5 Pt. A para. 4C inserted by S.S.I. 2019/278 art. 9(d)
  • sch. 5 Pt. A para. 7 inserted by S.S.I. 2019/278 art. 9(g)
  • Sch. 5 Pt. A para. 1A inserted by S.I. 2016/1167 art. 13(a)
  • Sch. 5 Pt. A para. 4A 4B inserted by S.I. 2016/1167 art. 13(c)
  • Sch. 5 Pt. A para. 4(a)(viii) inserted by S.I. 2017/1178 art. 11(c)
  • Sch. 5 Pt. A para. 4(a)(ix) inserted by S.I. 2019/1075 art. 9(c)(iv)
  • Sch. 5 Pt. A para. 4C inserted by S.I. 2019/1075 art. 9(d)
  • Sch. 5 Pt. A para. 7 inserted by S.I. 2019/1075 art. 9(g)
  • Sch. 5 Pt. A para. 1A inserted by S.I. 2019/498 art. 18(a)
  • Sch. 5 Pt. A para. 4(a)(viii) inserted by S.I. 2019/498 art. 18(c)(iii)
  • Sch. 5 Pt. A para. 4A 4B inserted by S.I. 2019/498 art. 18(d)
  • sch. 5 Pt. A para. 5 omitted by S.S.I. 2019/278 art. 9(e)
  • Sch. 5 Pt. A para. 2A omitted by S.I. 2014/2420 art. 21(1)(b)
  • Sch. 5 Pt. A para. 5 omitted by S.I. 2019/1075 art. 9(e)
  • Sch. 5 Pt. A para. 2(b)(c) revoked by S.I. 2015/1723 art. 3(k)(i)
  • Sch. 5 Pt. A para. 2A revoked by S.I. 2015/1723 art. 3(k)(ii)
  • Sch. 5 Pt. A para. 3(b)(c) revoked by S.I. 2015/1723 art. 3(k)(iii)
  • Sch. 5 Pt. A para. 4(a)(ii)-(vi) revoked by S.I. 2015/1723 art. 3(k)(iv)
  • sch. 5 Pt. A para. 6 substituted by S.S.I. 2019/278 art. 9(f)
  • Sch. 5 Pt. A para. 6 substituted by S.I. 2019/1075 art. 9(f)
  • Sch. 5 Pt. A para. 2(b)-(e) substituted for para. 2(b)(c) by S.I. 2014/2420 art. 21(1)(a)
  • Sch. 5 Pt. A para. 3(b)-(d) substituted for para. 3(b)(c) by S.I. 2014/2420 art. 21(1)(c)
  • Sch. 5 Pt. A para. 4(a)(ii)-(vii) substituted for para. 4(a)(ii)-(vi) by S.I. 2014/2420 art. 21(1)(d)
  • Sch. 5 Pt. A para. 4(a)(vii) word inserted by S.I. 2019/498 art. 18(c)(ii)
  • Sch. 5 Pt. A para. 4(a)(vi) word omitted by S.I. 2017/1178 art. 11(a)
  • Sch. 5 Pt. A para. 4(a)(vii) word omitted by S.I. 2017/1178 art. 11(b)
  • Sch. 5 Pt. A para. 4(a)(vi) word omitted by S.I. 2019/498 art. 18(c)(i)
  • Sch. 5 Pt. A para. 4(a)(vii) word omitted by S.I. 2019/498 art. 18(c)(ii)
  • sch. 5 Pt. A para. 4(a)(viii) words omitted by S.S.I. 2019/278 art. 9(c)(iii)
  • Sch. 5 Pt. A para. 4(a)(viii) words omitted by S.I. 2019/1075 art. 9(c)(iii)
  • sch. 5 Pt. A para. 2(e) words substituted by S.S.I. 2019/278 art. 9(a)(i)
  • sch. 5 Pt. A para. 2(e) words substituted by S.S.I. 2019/278 art. 9(a)(ii)
  • sch. 5 Pt. A para. 3(c) words substituted by S.S.I. 2019/278 art. 9(b)(i)
  • sch. 5 Pt. A para. 3(c) words substituted by S.S.I. 2019/278 art. 9(b)(ii)
  • sch. 5 Pt. A para. 4(a)(ii) words substituted by S.S.I. 2019/278 art. 9(c)(i)
  • sch. 5 Pt. A para. 4(a)(vi) words substituted by S.S.I. 2019/278 art. 9(c)(ii)(aa)
  • sch. 5 Pt. A para. 4(a)(vi) words substituted by S.S.I. 2019/278 art. 9(c)(ii)(bb)
  • Sch. 5 Pt. A para. 2(e) words substituted by S.I. 2019/1075 art. 9(a)(i)
  • Sch. 5 Pt. A para. 2(e) words substituted by S.I. 2019/1075 art. 9(a)(ii)
  • Sch. 5 Pt. A para. 3(c) words substituted by S.I. 2019/1075 art. 9(b)(i)
  • Sch. 5 Pt. A para. 3(c) words substituted by S.I. 2019/1075 art. 9(b)(ii)
  • Sch. 5 Pt. A para. 4(a)(ii) words substituted by S.I. 2019/1075 art. 9(c)(i)
  • Sch. 5 Pt. A para. 4(a)(vi) words substituted by S.I. 2019/1075 art. 9(c)(ii)(aa)
  • Sch. 5 Pt. A para. 4(a)(vi) words substituted by S.I. 2019/1075 art. 9(c)(ii)(bb)
  • Sch. 5 Pt. B para. 1A inserted by S.I. 2014/2420 art. 21(2)
  • sch. 6 Pt. A para. 1C inserted by S.S.I. 2019/278 art. 10(a)(ii)
  • sch. 6 Pt. A para. 11 inserted by S.S.I. 2019/278 art. 10(a)(iii)
  • Sch. 6 Pt. A para. 1A 1B inserted by S.I. 2016/1167 art. 14(a)
  • Sch. 6 Pt. A para. 7-10 inserted by S.I. 2016/1167 art. 14(d)
  • Sch. 6 Pt. A para. 1C inserted by S.I. 2019/1075 art. 10(a)(ii)
  • Sch. 6 Pt. A para. 11 inserted by S.I. 2019/1075 art. 10(a)(iii)
  • Sch. 6 Pt. A para. 1A 1B inserted by S.I. 2019/498 art. 19(a)
  • Sch. 6 Pt. A para. 7-10 inserted by S.I. 2019/498 art. 19(d)
  • Sch. 6 Pt. A para. 5 omitted by S.I. 2014/2420 art. 22(1)
  • Sch. 6 Pt. A para. 3 omitted by S.I. 2016/1167 art. 14(c)
  • Sch. 6 Pt. A para. 3 omitted by S.I. 2019/498 art. 19(c)
  • Sch. 6 Pt. A para. 4A revoked by S.I. 2015/1723 art. 3(l)
  • Sch. 6 Pt. A para. 5 revoked by S.I. 2015/1723 art. 3(l)
  • Sch. 6 Pt. B para. 3(a)(ii) revoked by S.I. 2015/1723 art. 3(m)
  • Sch. 6 Pt. B para. 3(a)(ii) substituted by S.I. 2019/498 art. 20(b)
  • Sch. 6 Pt. B para. 2 2A 2B substituted for para. 2 by S.I. 2014/2420 art. 22(2)(a)
  • Sch. 6 Pt. B para. 3(a)(ii)(iii) substituted for para. 3(a)(ii) by S.I. 2014/2420 art. 22(2)(b)
  • sch. 6 Pt. B para. 2B words inserted by S.S.I. 2019/278 art. 10(b)
  • Sch. 6 Pt. B para. 2B words inserted by S.I. 2019/1075 art. 10(b)
  • Sch. 6 Pt. B para. 2B words substituted by S.I. 2017/1178 art. 12(2)
  • Sch. 6 Pt. B para. 2B words substituted by S.I. 2019/498 art. 20(a)
  • sch. 7 Pt. A para. 1C inserted by S.S.I. 2019/278 art. 11(a)(ii)
  • sch. 7 Pt. A para. 11 inserted by S.S.I. 2019/278 art. 11(a)(iii)
  • Sch. 7 Pt. A para. 1A 1B inserted by S.I. 2016/1167 art. 15(a)
  • Sch. 7 Pt. A para. 7-10 inserted by S.I. 2016/1167 art. 15(d)
  • Sch. 7 Pt. A para. 1C inserted by S.I. 2019/1075 art. 11(a)(ii)
  • Sch. 7 Pt. A para. 11 inserted by S.I. 2019/1075 art. 11(a)(iii)
  • Sch. 7 Pt. A para. 1A 1B inserted by S.I. 2019/498 art. 21(a)
  • Sch. 7 Pt. A para. 7-10 inserted by S.I. 2019/498 art. 21(d)
  • Sch. 7 Pt. A para. 5 omitted by S.I. 2014/2420 art. 23(1)
  • Sch. 7 Pt. A para. 3 omitted by S.I. 2016/1167 art. 15(c)
  • Sch. 7 Pt. A para. 3 omitted by S.I. 2019/498 art. 21(c)
  • Sch. 7 Pt. A para. 4A revoked by S.I. 2015/1723 art. 3(n)
  • Sch. 7 Pt. A para. 5 revoked by S.I. 2015/1723 art. 3(n)
  • Sch. 7 Pt. B para. 4(a)(ii) revoked by S.I. 2015/1723 art. 3(o)
  • Sch. 7 Pt. B para. 2 2A 2B substituted for para. 2 by S.I. 2014/2420 art. 23(2)(a)
  • Sch. 7 Pt. B para. 4(a)(ii)(iii) substituted for para. 4(a)(ii) by S.I. 2014/2420 art. 23(2)(b)
  • sch. 7 Pt. B para. 2B words inserted by S.S.I. 2019/278 art. 11(b)
  • Sch. 7 Pt. B para. 2B words inserted by S.I. 2019/1075 art. 11(b)
  • Sch. 7 Pt. B para. 2B words substituted by S.I. 2017/1178 art. 13(2)
  • Sch. 7 Pt. B para. 2B words substituted by S.I. 2019/498 art. 22
  • sch. 7A inserted by S.S.I. 2019/130 reg. 59 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • Sch. 8 Pt. B para. 2A inserted by S.I. 2017/1178 art. 14(2)(b)
  • Sch. 8 Pt. B para. 2A inserted by S.I. 2019/498 art. 24(b)
  • Sch. 8 Pt. B para. 3 substituted by S.I. 2017/1178 art. 14(2)(c)
  • Sch. 8 Pt. B para. 6 substituted by S.I. 2017/1178 art. 14(2)(d)
  • Sch. 8 Pt. B para. 3 substituted by S.I. 2019/498 art. 24(c)
  • Sch. 8 Pt. B para. 6 substituted by S.I. 2019/498 art. 24(d)
  • Sch. 9 para. 4(a) substituted by S.I. 2019/786 reg. 57(d)(ii) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • sch. 11A inserted by S.S.I. 2019/278 art. 12
  • Sch. 11A inserted by S.I. 2019/1075 art. 12
  • Sch. 12 Pt. C inserted by S.I. 2016/1167 art. 16(b)
  • sch. 12 Pt. C omitted by S.S.I. 2019/130 reg. 62(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • Sch. 12 Pt. C omitted by S.I. 2019/786 reg. 58(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • Sch. 12 para. 2 omitted by S.I. 2019/735 reg. 54(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • Sch. 12 Pt. C omitted by S.I. 2019/735 reg. 54(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • Sch. 12 para. 1 words omitted by S.I. 2019/735 reg. 54(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • sch. 12 Pt. A para. 2 omitted by S.S.I. 2019/130 reg. 62(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • Sch. 12 Pt. A para. 2 omitted by S.I. 2019/786 reg. 58(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • sch. 12 Pt. A para. 1 word substituted by S.S.I. 2019/130 reg. 62(a)(i) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • sch. 12 Pt. A para. 1 words omitted by S.S.I. 2019/130 reg. 62(a)(iii) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • Sch. 12 Pt. A para. 1 words omitted by S.I. 2019/786 reg. 58(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • sch. 12 Pt. A para. 1 words substituted by S.S.I. 2019/130 reg. 62(a)(ii) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • sch. 12A-12G inserted by S.S.I. 2019/130 reg. 63 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • Sch. 13A inserted by S.I. 2019/786 reg. 60 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • Sch. 13A inserted by S.I. 2019/735 reg. 56 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • sch. 13B inserted by S.S.I. 2019/130 reg. 65 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2(1A)(1B) inserted by S.S.I. 2019/130 reg. 3(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2(5) inserted by S.I. 2016/1167 art. 3(2)
  • art. 2(5) inserted by S.I. 2019/498 art. 3(c)
  • art. 2(5) omitted by S.S.I. 2019/130 reg. 3(e) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2(5) omitted by S.I. 2019/786 reg. 8(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 2(5) omitted by S.I. 2019/735 reg. 4(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 2(6) inserted by S.I. 2019/786 reg. 8(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 2(6) inserted by S.I. 2019/735 reg. 4(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 2A(1)(a)(aa) omitted by S.S.I. 2019/130 reg. 4(a) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2A(1)(aa) inserted by S.I. 2019/734 Sch. para. 65(3)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 2A(1A) inserted by S.I. 2019/786 reg. 9(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 2A(1A) inserted by S.I. 2019/735 reg. 5(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 2A(1B) inserted by S.S.I. 2019/130 reg. 4(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2A(2)(aa) inserted by S.I. 2019/734 Sch. para. 65(3)(c) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 2A(3)(a)(aa) omitted by S.S.I. 2019/130 reg. 4(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2A(3)(aa) inserted by S.I. 2019/734 Sch. para. 65(3)(d) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 2A(3A) inserted by S.I. 2019/786 reg. 9(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 2A(3A) inserted by S.I. 2019/735 reg. 5(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 2A(3B) inserted by S.S.I. 2019/130 reg. 4(d) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 2A(6)(aa) inserted by S.I. 2019/734 Sch. para. 65(3)(f) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 4A inserted by S.I. 2019/786 reg. 12 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 4A inserted by S.I. 2019/735 reg. 8 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 4B inserted by S.S.I. 2019/130 reg. 7 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 5(A1) inserted by S.I. 2019/786 reg. 13(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 5(A1) inserted by S.I. 2019/735 reg. 9(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 5(1)(1A) omitted by S.S.I. 2019/130 reg. 8(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 5(1)(1A) omitted by S.I. 2019/786 reg. 13(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 5(1A) amendment by S.I. 2014/2420, art. 4(2) extended to W. by S.I. 2015/1723 art. 2(c)
  • art. 5(1A) inserted by S.I. 2014/2420 art. 4(2)
  • art. 5(1A) omitted by S.I. 2019/735 reg. 9(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 5(1B) inserted by S.S.I. 2019/130 reg. 8(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 5(3) inserted by S.I. 2019/786 reg. 13(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 5(3) inserted by S.I. 2019/735 reg. 9(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 5(3) words substituted in earlier amending provision S.I. 2019/786, reg. 13(e) by S.I. 2019/809 reg. 4(4) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 5(4) inserted by S.S.I. 2019/130 reg. 8(e) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 6(A1) inserted by S.I. 2019/786 reg. 14(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 6(A1) inserted by S.I. 2019/735 reg. 10(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 6(1)(1A) omitted by S.S.I. 2019/130 reg. 9(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 6(1A) inserted by S.I. 2019/734 Sch. para. 65(4)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 6(2)(2A) omitted by S.S.I. 2019/130 reg. 9(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 6(2A) inserted by S.I. 2019/734 Sch. para. 65(4)(c) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 6(2B) inserted by S.S.I. 2019/130 reg. 9(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 6A inserted by S.I. 2019/786 reg. 15 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 6A inserted by S.I. 2019/735 reg. 11 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 6B inserted by S.S.I. 2019/130 reg. 10 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 7(A1) inserted by S.I. 2019/786 reg. 16(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 7(A1) inserted by S.I. 2019/735 reg. 12(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 7(1A) inserted by S.S.I. 2019/130 reg. 11(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 8(A1) inserted by S.I. 2019/786 reg. 17(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 8(A1)-(A3) inserted by S.I. 2019/735 reg. 13(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 8(A1)-(A3) substituted for art. 8(A1) in earlier amending provision S.I. 2019/786, reg. 17(a) by S.I. 2019/809 reg. 4(5)(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 8(1A)-(1C) inserted by S.S.I. 2019/130 reg. 12(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 9(A1)(B1) inserted by S.I. 2019/786 reg. 18(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 9(A1)(B1) inserted by S.I. 2019/735 reg. 14(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 9(2A)(2B) inserted by S.S.I. 2019/130 reg. 13(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 9(4)(5) inserted by S.I. 2019/786 reg. 18(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 9(4)(5) inserted by S.I. 2019/735 reg. 14(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 9(6)(7) inserted by S.S.I. 2019/130 reg. 13(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 10A inserted by S.I. 2019/786 reg. 20 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 10A inserted by S.I. 2019/735 reg. 16 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 10B inserted by S.S.I. 2019/130 reg. 15 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 12(A1)(B1) inserted by S.I. 2019/786 reg. 22(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 12(A1)(B1) inserted by S.I. 2019/735 reg. 18(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 12(2)(aa) amendment by S.I. 2014/2420, art. 7(a) extended to W. by S.I. 2015/1723 art. 2(f)
  • art. 12(2)(aa) inserted by S.I. 2014/2420 art. 7(a)
  • art. 12(2A)(2B) inserted by S.S.I. 2019/130 reg. 17(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 12(4A) inserted by S.I. 2019/786 reg. 22(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 12(4A) inserted by S.I. 2019/735 reg. 18(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 12(4B) inserted by S.S.I. 2019/130 reg. 17(e) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 12A inserted by S.I. 2019/786 reg. 23 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 12A inserted by S.I. 2019/735 reg. 19 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 12A(2)(a) words substituted in earlier amending provision S.I. 2019/786, reg. 23 by S.I. 2019/809 reg. 4(7) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 12B inserted by S.S.I. 2019/130 reg. 18 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 15(4A) inserted by S.I. 2019/786 reg. 25(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 15(4A) inserted by S.I. 2019/735 reg. 21(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 15(4B) inserted by S.S.I. 2019/130 reg. 20(d) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 16A inserted by S.I. 2019/786 reg. 27 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 16A inserted by S.I. 2019/735 reg. 23 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 16B inserted by S.S.I. 2019/130 reg. 22 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 17(6) inserted by S.I. 2018/1048 art. 6(b)
  • art. 17A inserted by S.I. 2019/786 reg. 29 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 17A inserted by S.I. 2019/735 reg. 25 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 17B inserted by S.S.I. 2019/130 reg. 24 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 18(1A) amendment by S.I. 2014/2420, art. 8(2) extended to W. by S.I. 2015/1723 art. 2(i)
  • art. 18(1A) inserted by S.I. 2014/2420 art. 8(2)
  • art. 18(3)(4) inserted by S.I. 2016/1167 art. 6
  • art. 18(3) words omitted by S.I. 2019/734 Sch. para. 65(6)(a) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 18(3A) inserted by S.I. 2019/734 Sch. para. 65(6)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 19(1)(aa) amendment by S.I. 2014/2420, art. 9(a) extended to W. by S.I. 2015/1723 art. 2(j)
  • art. 19(1)(aa) inserted by S.I. 2014/2420 art. 9(a)
  • art. 19A inserted by S.I. 2019/786 reg. 32 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 19A inserted by S.I. 2019/735 reg. 28 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 19A(2)(d) words inserted in earlier amending provision S.I. 2019/786, reg. 32 by S.I. 2019/809 reg. 4(8)(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 19A(3)(b) word substituted in earlier amending provision S.I. 2019/786, reg. 32 by S.I. 2019/809 reg. 4(8)(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 19A(3)(d) words inserted in earlier amending provision S.I. 2019/786, reg. 32 by S.I. 2019/809 reg. 4(8)(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 19B inserted by S.S.I. 2019/130 reg. 27 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 20(9)(10) inserted by S.I. 2019/498 art. 5(d)
  • art. 20(10) inserted by S.I. 2018/1048 art. 7(d)
  • art. 20A inserted by S.I. 2019/786 reg. 34 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A inserted by S.I. 2019/735 reg. 30 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 20A(1)(a) words inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(1)(b) words substituted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(1)(c) inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(c) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(2)(a) words inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(d) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(2)(b)(c) substituted for art. 20A(2)(b) in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(e) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(3) words inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(f)(i) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(3)(e) inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(f)(ii) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20A(6) inserted in earlier amending provision S.I. 2019/786, reg. 34 by S.I. 2019/809 reg. 4(9)(g) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 20B inserted by S.S.I. 2019/130 reg. 29 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 21(1)-(3) substituted for art. 21(1)(2) by S.I. 2014/2420 art. 11
  • art. 21(2A) inserted by S.I. 2016/1167 art. 8(b)
  • art. 21(2A) inserted by S.I. 2019/498 art. 6(b)
  • art. 21(2A) omitted by S.S.I. 2019/130 reg. 30(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 21(2A) omitted by S.I. 2019/786 reg. 35(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 21(2A) omitted by S.I. 2019/735 reg. 31(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 22A inserted by S.I. 2019/786 reg. 37 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 22A inserted by S.I. 2019/735 reg. 33 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 22B inserted by S.S.I. 2019/130 reg. 32 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 24(1A) inserted by S.I. 2019/734 Sch. para. 65(7)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 28(7)(c) inserted by S.I. 2019/786 reg. 41(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 28(7)(c) inserted by S.I. 2019/735 reg. 37(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 30A inserted by S.I. 2019/786 reg. 44 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 30A inserted by S.I. 2019/735 reg. 40 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 30B inserted by S.S.I. 2019/130 reg. 39 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 37A inserted by S.S.I. 2019/130 reg. 43 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 38(1)(za) inserted by S.I. 2019/786 reg. 48(a)(ii) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 38(1)(za) inserted by S.I. 2019/735 reg. 44(a)(ii) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 38(1)(zb) inserted by S.S.I. 2019/130 reg. 44(a)(ii) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 39(A1)(B1) inserted by S.I. 2019/786 reg. 49(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 39(A1)(B1) inserted by S.I. 2019/735 reg. 45(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 39(2A)(2B) inserted by S.S.I. 2019/130 reg. 45(c) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 39(7)(aa) inserted by S.S.I. 2019/130 reg. 45(h)(i) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 39(7)(aa) inserted by S.I. 2019/735 reg. 45(h)(i) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 39(7)(ab) inserted by S.I. 2019/786 reg. 49(h)(i) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 40(1B) inserted by S.I. 2016/1167 art. 9(b)
  • art. 40(1B) substituted by S.I. 2019/498 art. 7(a)
  • art. 40(1B) words omitted by S.I. 2019/734 Sch. para. 65(11)(a) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 40(1C) inserted by S.I. 2019/734 Sch. para. 65(11)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 40(2A) inserted by S.I. 2019/786 reg. 50(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 40(2A) inserted by S.I. 2019/735 reg. 46(b) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 40(2B) inserted by S.S.I. 2019/130 reg. 46(b) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 41A inserted by S.I. 2019/786 reg. 52 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 41A inserted by S.I. 2019/735 reg. 48 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 41B inserted by S.S.I. 2019/130 reg. 48 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 42A inserted by S.I. 2017/1178 art. 4
  • art. 42A inserted by S.I. 2019/498 art. 8
  • art. 42A(1A) inserted by S.I. 2019/734 Sch. para. 65(12)(a) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 42A(2) words substituted by S.I. 2019/734 Sch. para. 65(12)(b) (This amendment comes into force on the day on which s. 81 of the Forestry and Land Management (Scotland) Act 2018 (asp 8) comes into force. That provision is commenced on 1.4.2019 by S.S.I. 2019/47, reg. 2)
  • art. 43(1)(a)(ib) inserted by S.S.I. 2019/130 reg. 50(a) (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))
  • art. 43(1)(a)(ia) inserted by S.I. 2019/786 reg. 54(a)(ii) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 43(1)(a)(iiia) inserted by S.I. 2019/786 reg. 54(a)(iii) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 43(1)(a)(iva) inserted by S.I. 2019/786 reg. 54(a)(iv) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 43(1)(a)(va) inserted by S.I. 2019/786 reg. 54(a)(v) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 43(1)(a)(via) inserted by S.I. 2019/786 reg. 54(a)(vi) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 43(1)(a)(ia) inserted by S.I. 2019/735 reg. 50(a) (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 43(1)(a)(xv) inserted by S.I. 2017/1178 art. 5(b)
  • art. 43(1)(a)(xv) inserted by S.I. 2019/498 art. 9(c)
  • art. 43(1)(a)(zi) inserted by S.I. 2019/786 reg. 54(a)(i) (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 45A inserted by S.I. 2019/786 reg. 55 (This amendment not applied to legislation.gov.uk. S.I. 2019/786 revoked immediately before IP completion day by S.I. 2020/1482, regs. 2(2)(a), 54(a))
  • art. 45A inserted by S.I. 2019/735 reg. 51 (This amendment not applied to legislation.gov.uk. S.I. 2019/735, Pts. 2, 3 revoked on IP completion day by S.I. 2020/1492, regs. 2(b), 4)
  • art. 45B inserted by S.S.I. 2019/130 reg. 51 (This amendment not applied to legislation.gov.uk. Affecting provision revoked (31.12.2020 immediately before IP completion day) by S.S.I. 2020/466, reg. 1(1)(b), sch. (with reg. 32))

PART AE+SRelevant material, from third countries, which may only be landed in Great Britain if special requirements are satisfied

Extent Information

E1This version of this provision extends to England and Scotland only; a separate version has been created for Wales only

(1)(2)(3)
ItemDescription of relevant materialRequirements of landing
1.

Wood of conifers (Coniferales), except that of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material,

  • dunnage, or

  • wood of Libocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82°C for a 7 to 8 day period,

but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the phytosanitary certificate or phytosanitary certificate for re-export
2.Wood of conifers (Coniferales), except that of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occurThe wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
3.

Wood of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap,

  • wood packaging material, or

  • dunnage,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

4.Wood of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

5.

Wood of conifers (Coniferales), other than in the form of:

  • chips, particles, sawdust, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in Russia, Kazakhstan or Turkey

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from:

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

is bark-free and free from grub holes which are caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3mm across;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with the current usage; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

6.

Wood of conifers (Coniferales) other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in third countries, other than:

  • Russia, Kazakhstan or Turkey;

  • European countries; or

  • Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free and free from grub holes which are larger than 3mm across and which are caused by the genus Monochamus spp. (non-European);

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “Kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

7.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from conifers (Coniferales), originating in:

  • Russia, Kazakhstan or Turkey, or

  • non-European countries other than Canada, China, Japan, the Republic of Korea, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from :

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

has been produced from debarked round wood;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved though an appropriate time/temperature schedule; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

8.

Wood packaging material,

other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof,

coming from any third country except Switzerland

[F1The wood packaging material shall:

(a)

from 1st July 2009, be free from bark with the exception of any number of individual pieces of bark if they are either less than 3 cm in width (regardless of the length) or, if greater than 3 centimetres in width, of not more than 50 square centimetres in area;

(b)

be subject to one of the approved treatments as specified in Annex I to ISPMNo. 15; and

(c)

display a mark as specified in Annex II to ISPMNo. 15, indicating that the wood packaging material has been subjected to an approved phytosanitary treatment]

9.

Wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, other than in the form of:

  • wood intended for the production of veneer sheets; or

  • chips, particles, sawdust, shavings, wood waste or scrap,

originating in the USA or Canada

The wood shall be accompanied by an official statement that it that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage
10.Wood of Acer saccharum Marsh., intended for the production of veneer sheets, originating in the USA or CanadaThe wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ceratocystis virescens (Davidson) Moreau and is intended for the production of veneer sheets
[F210a.

Wood of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc., other than in the form of

(i)

chips, obtained in whole or part from these trees,

(ii)

wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,

(ii)

wood used to wedge or support non-wood cargo, but including wood which has not kept its natural round surface, originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

The wood shall be accompanied by an official statement that the wood:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

is squared so as to remove entirely the rounded surface]

11.

Wood of Quercus L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap; or

  • casks, barrels, vats, tubs or other coopers' products or parts thereof, of wood (including staves) where there is documented evidence that the wood has been produced or manufactured using heat treatment to achieve a minimum temperature of 176°C for 20 minutes,

but including wood which has not kept its natural round surface, originating in the USA

The wood shall be accompanied by an official statement that it:

(a)

is squared so as to remove entirely the rounded surface;

(b)

is bark-free and the water content is less than 20% expressed as a percentage of the dry matter;

(c)

is bark-free and has been disinfected by an appropriate hot-air or hot water treatment; or

(d)

in the case of sawn wood with or without residual bark attached, has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

[F312.Wood of Platanus L., including wood which has not kept its natural round surface, which originates in any third country

(a) The wood shall be accompanied by a phytosanitary certificate or a phytosanitary certificate for re-export which includes under the heading “Additional declaration” an official statement that it originates in:

(i) a place of production in a country in which Ceratocystis fimbriata f. spp. platani Walter is known not to occur; or

(ii) an area established and maintained as an area free from Ceratocystis fimbriata f. spp. platani Walter in accordance with ISPM No 4; or

(b) there shall be evidence by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or its packaging in accordance with current commercial usage, that the wood has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule]

13.Wood of Populus L., except that in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

is bark-free; or

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time / temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

14.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from:

  • Acer saccharum Marsh., originating in the USA or Canada,

  • F4... or

  • Populus L., originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved though an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

[F514a. Isolated bark of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc. originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan and the USA

The bark shall be accompanied by an official statement that the consignment:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

has been processed into pieces of not more than 2.5 cm thickness and width]

15.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Quercus L. originating in the USA

The wood is accompanied by an official statement that it:

(a)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule; or

(b)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

16.Isolated bark of conifers (Coniferales), originating in any country outside EuropeThe isolated bark shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve the minimum temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
[F616a. Wood in the form of chips obtained in whole or part from Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc. originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

The wood shall be accompanied by an official statement that it:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

has been processed into pieces of not more than 2.5 cm thickness and width]

17.

Dunnage, including that which has not kept its natural round, surface, other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof;

consigned directly from any third country except Switzerland

[F7The dunnage shall:

(a)

from 1st July 2009, be free from bark with the exception of any number of individual pieces of bark if they are either less than 3 cm in width (regardless of the length) or, if greater than 3 centimetres in width, of not more than 50 square centimetres in area;

(b)

be subject to one of the approved treatments as specified in Annex I to ISPM No. 15; and

(c)

display a mark as specified in Annex II to ISPM No. 15, indicating that the wood has been subjected to an approved phytosanitary treatment]

18.Trees, other than fruit or seeds, of conifers (Coniferales), originating in any country outside EuropeWithout prejudice to the requirements in items 19 to 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Pissodes spp. (non-European)
19.Trees, other than fruit or seeds, of conifers (Coniferales), over 3 metres in height, originating in any country outside EuropeWithout prejudice to the requirements in items 18, 20, 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Scolytidae spp. (non- European)
[F819a. Trees of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc., intended for planting, other than seeds and plants in tissue culture originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

[F9Without prejudice to the requirements in item 19b, the trees shall be accompanied by an official statement] that they:

(a)

have been grown throughout their life in an area free from Agrilus planipennis Fairmaire, established by the national plant protection organisation in accordance with ISPMNo. 4; or

(b)

have, for a period of at least two years prior to export, been grown in a place of production where no signs of Agrilus planipennis Fairmaire have been observed during two official inspections per year carried out at appropriate times, including immediately prior to export]

[F1019b. Trees intended for planting of Fraxinus L. which originate in a third country Without prejudice to the requirements in item 19a, the trees shall be accompanied by a phytosanitary certificate which has been issued by the national plant protection organisation of the country from which the trees originate and which includes under the heading “Additional Declaration” an official statement that the trees have been grown throughout their life in an area which has been established and is maintained as an area free from Chalara fraxinea T. Kowalski (including its teleomorph Hymenoscyphus pseudoalbidus) in accordance with ISPM No 4]
20.Trees, other than seeds, of Pinus L., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18, 19, 21 and 31, the trees shall be accompanied by an official statement that no symptoms of Scirrhia acicola (Dearn.) Siggers or Scirrhia pini Funk and Parker have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
21.Trees, other than seeds, of Abies Mill., Larix Mill., Picea A Dietr., Pinus L., Pseudotsuga Carr. or Tsuga Carr., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18 to 20 and 31, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
[F1121a.Trees intended for planting, including seeds and cones for propagation purposes, of the genera and species referred to in Article 1(2) of Decision 2007/433/EC, originating in any third country

Without prejudice to the requirements in items 18 to 21, 29 and 31 the trees shall be accompanied by an official statement that—

(a)

they originate in a place of production which is registered and supervised by the national plant protection organisation in the country of origin; and

(b)

they meet the requirements of paragraph (a), (b) or (c) of point I of Annex I to Decision 2007/433/EC]

22.Trees, other than fruit or seeds, of Quercus L., originating in the USAWithout prejudice to the requirements in items 23, [F1224A], 31 and 32, the trees shall be accompanied by an official statement that they originate in an area or areas known to be free from Ceratocystis fagacearum (Bretz) Hunt
23.Trees, other than fruit or seeds, of Castanea Mill. or Quercus L., originating in any country outside EuropeWithout prejudice to the requirements in items 22, 24, [F1324A, 24B,] 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Cronartium spp. (non-European) have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
[F1424.Trees of Castanea Mill. intended for planting, which originate in any third country

Without prejudice to the requirements in items 23, 24B, 31 and 32, the trees shall be accompanied by a phytosanitary certificate or a phytosanitary certificate for re-export which includes under the heading “Additional declaration” an official statement that they have been grown throughout their life in:

(a) a place of production in a country in which Cryphonectria parasitica (Murrill) Barr is known not to occur; or

(b) an area established and maintained as an area free from Cryphonectria parasitica (Murrill) Barr in accordance with ISPM No 4]

[F1424ATrees, other than seeds, of Quercus L. intended for planting, which originate in any third country

Without prejudice to the requirements in items 22, 23, 31 and 32, the trees shall be accompanied by an official statement that:

(a) they originate in an area known to be free from Cryphonectria parasitica (Murrill) Barr; or

(b) no symptoms of Cryphonectria parasitica (Murrill) Barr have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation]

[F15[F1624B] .Trees, other than fruit or seeds, of Castanea Mill., intended for planting, originating in any third country

Without prejudice to the requirements in items 23, 24, 29, 31 and 32, the trees shall be accompanied by a phytosanitary certificate or phytosanitary certificate for re-export which states under the rubric “Additional declaration” that they have been grown throughout their life in places of production:

(a)

in countries where Dryocosmus kuriphilus Yasumatsu is not known to occur; or

(b)

in an area or areas established by the national plant protection organisation in the country of origin as being free from Dryocosmus kuriphilus Yasumatsu, in accordance with ISPMNo. 4, and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “Place of origin”]

[F1725.Trees, other than seeds, of Platanus L. intended for planting, which originate in any third country

Without prejudice to the requirements in items 31, 33 and 34, the trees shall be accompanied by a phytosanitary certificate or a phytosanitary certificate for re-export which includes under the heading “Additional declaration” an official statement that they have been grown throughout their life in:

(a) a place of production in a country in which Ceratocystis fimbriata f. spp. platani Walter is known not to occur; or (b) an area established and maintained as an area free from Ceratocystis fimbriata f. spp. platani Walter in accordance with ISPM No 4]

26.Trees, other than seeds, of Populus L., intended of planting, originating in any third countryWithout prejudice to the requirements in items 27, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
27.Trees, other than fruit or seeds, of Populus L., originating in any country of the American continentWithout prejudice to the requirements in items 26, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Mycosphaerella populorum G E Thompson have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
28.Trees, other than seeds, of Ulmus L., intended for planting, originating in any country in North AmericaWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Elm phlöem necrosis mycoplasm have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
29.Trees with roots, planted or intended for planting, grown in the open air, originating in any third countryWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that the place of production is known to be free from Clavibacter michiganensis ssp. sepedonicus (Spieckermann and Kotthoff) Davis et al., Globodera pallida (Stone) Behrens, Globodera rostochiensis (Wollenweber) Behrens and Synchytrium endobioticum (Schilbersky) Percival
30.

[F18Soil or growing medium that—

(a)

is attached to, or accompanies, trees for the purpose of sustaining the vitality of those trees;

(b)

consists—

(i)

wholly or partly of soil or any solid organic substance such as parts of plants or humus (including peat or bark); or

(ii)

partly of any solid inorganic substance; and

(c)

originates from—

(i)

Belarus, Georgia, Moldova, Russia, Turkey or the Ukraine; or

(ii)

any country outside Europe, other than Algeria, Egypt, Israel, Libya, Morocco or Tunisia]

Without prejudice to the requirements in item 31, the material shall be accompanied by an official statement that:

(a)

at the time of planting it was:

(i)

free from soil and organic matter;

(ii)

found to be free from insects and harmful nematodes and subjected to appropriate examination or heat treatment or fumigation to ensure that it was free from other harmful organisms; or

(iii)

subject to appropriate heat treatment or fumigation to ensure freedom from harmful organisms; and that

(b)

since planting, either

(i)

appropriate measures have been taken to ensure that the growing material has been maintained free from harmful organisms; or

(ii)

within two weeks prior to dispatch, the trees were shaken free from the material leaving the minimum amount necessary to sustain vitality during transport, and, if replanted, the material used for that purpose meets the requirements laid down in paragraph (a)

31.Trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country other than a country in the Euro-Mediterranean area

Without prejudice to the requirements in items 18 to 30 and 32, the trees shall be accompanied by an official statement that they:

(a)

are free from plant debris and from flowers and fruits;

(b)

have been grown in nurseries; and

(c)

have been inspected at appropriate times and prior to export and found to be free from symptoms of harmful bacteria, viruses and virus-like organisms, and either found to be free from signs or symptoms of harmful nematodes, insects, mites and fungi, or have been subjected to appropriate treatment to eliminate such organisms

32.Deciduous trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country, other than a country in the Euro-Mediterranean areaWithout prejudice to the requirements in items 22 to 29 and 32, the trees shall be accompanied by an official statement that they are dormant and free from leaves.
[F1933.Trees of specified plants within the meaning of Article 1(a) of Decision 2012/138/EU which originate in China

Without prejudice to the requirements in items 25 to 29, 31 and 32:

(a) the trees shall be accompanied by a phytosanitary certificate which includes an official statement under the heading “Additional declaration” in accordance with point 1 of Section 1(B) of Annex I to Decision 2012/138/EU; and

(b) the place of production of the trees shall meet the requirements specified in Article 3(1)(c) of Decision 2012/138/EU]

[F1934.Trees of specified plants within the meaning of Article 1(a) of Decision 2012/138/EU which originate in any third country where Anoplophora chinensis (Forster) is known to be present, other than ChinaWithout prejudice to the requirements in items 25 to 29, 31 and 32, the trees shall be accompanied by a phytosanitary certificate which includes an official statement under the heading “Additional declaration” in accordance with point 1 of Section 1(A) of Annex I to Decision 2012/138/EU]

Textual Amendments

F1Words in Sch. 4 Pt. A Item 8 substituted (1.4.2009) by Plant Health (Forestry) (Amendment) Order 2009 (S.I. 2009/594), arts. 1, 2(5)(a)

F4Words in Sch. 4 Pt. A Item 14 omitted (E.S.) (11.11.2013) by virtue of The Plant Health (Forestry) (Amendment) (England and Scotland) Order 2013 (S.I. 2013/2691), arts. 1(b), 8(1)(b)

F7Words in Sch. 4 Pt. A Item 17 substituted (1.4.2009) by Plant Health (Forestry) (Amendment) Order 2009 (S.I. 2009/594), arts. 1, 2(5)(e)

F9Words in Sch. 4 Pt. A Item 19a substituted (29.10.2012 at 18.00) by The Plant Health (Forestry) (Amendment) Order 2012 (S.I. 2012/2707), arts. 1(2)(a), 2(10)(a)

F14Sch. 4 Pt. A Items 24, 24A substituted for Sch. 4 Pt. A Item 24 (E.S.) (11.11.2013) by The Plant Health (Forestry) (Amendment) (England and Scotland) Order 2013 (S.I. 2013/2691), arts. 1(b), 8(1)(e)

F16Sch. 4 Pt. A Item 24B: Sch. 4 Pt. A Item 24a renumbered as Sch. 4 Pt. A Item 24B (E.S) (11.11.2013) by The Plant Health (Forestry) (Amendment) (England and Scotland) Order 2013 (S.I. 2013/2691), arts. 1(b), 8(1)(f)

F18Words in Sch. 4 Pt. A Item 30 substituted (21.12.2009) by Plant Health (Forestry) (Amendment) (No.2) Order 2009 (S.I. 2009/3020), arts. 1, 2(4)

F19Sch. 4 Pt. A Items 33, 34 substituted for Sch. 4 Pt. A Item 33 (E.S.) (11.11.2013) by The Plant Health (Forestry) (Amendment) (England and Scotland) Order 2013 (S.I. 2013/2691), arts. 1(b), 8(1)(h)

Extent Information

E1This version of this provision extends to England and Scotland only; a separate version has been created for Wales only

PART AWRelevant material, from third countries, which may only be landed in Great Britain if special requirements are satisfied

Extent Information

E2This version of this provision extends to Wales only; a separate version has been created for England and Scotland only

(1)(2)(3)
ItemDescription of relevant materialRequirements of landing
1.

Wood of conifers (Coniferales), except that of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material,

  • dunnage, or

  • wood of Libocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82°C for a 7 to 8 day period,

but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the phytosanitary certificate or phytosanitary certificate for re-export
2.Wood of conifers (Coniferales), except that of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occurThe wood shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
3.

Wood of Thuja L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap,

  • wood packaging material, or

  • dunnage,

originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

4.Wood of Thuja L., in the form of chips, particles, sawdust, shavings, wood waste or scrap, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

5.

Wood of conifers (Coniferales), other than in the form of:

  • chips, particles, sawdust, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in Russia, Kazakhstan or Turkey

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from:

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

is bark-free and free from grub holes which are caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3mm across;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with the current usage; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

6.

Wood of conifers (Coniferales) other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from these conifers,

  • wood packaging material, or

  • dunnage,

but including that which has not kept its natural round surface, originating in third countries, other than:

  • Russia, Kazakhstan or Turkey;

  • European countries; or

  • Canada, China, Japan, the Republic of Korea, Mexico, Taiwan, or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

is bark-free and free from grub holes which are larger than 3mm across and which are caused by the genus Monochamus spp. (non-European);

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “Kiln-dried” or “KD” or another internationally recognised mark put on the wood or on any wrapping in accordance with current usage; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, and there shall be evidence of that heat treatment by a mark “HT”:

(i)

put on the wood or on any wrapping in accordance with current usage, and

(ii)

on the phytosanitary certificate or phytosanitary certificate for re-export

7.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap obtained in whole or in part from conifers (Coniferales), originating in:

  • Russia, Kazakhstan or Turkey, or

  • non-European countries other than Canada, China, Japan, the Republic of Korea, Taiwan or the USA, where Bursaphelenchus xylophilus (Steiner and Bührer) Nickle et al. is known to occur

The wood shall be accompanied by an official statement that it:

(a)

originates in an area or areas known to be free from :

  • Monochamus spp. (non-European),

  • Pissodes spp. (non-European), and

  • Scolytidae spp. (non-European),

and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “place of origin”;

(b)

has been produced from debarked round wood;

(c)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved though an appropriate time/temperature schedule; or

(d)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

8.

Wood packaging material,

other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof,

coming from any third country except Switzerland

[F1The wood packaging material shall:

(a)

from 1st July 2009, be free from bark with the exception of any number of individual pieces of bark if they are either less than 3 cm in width (regardless of the length) or, if greater than 3 centimetres in width, of not more than 50 square centimetres in area;

(b)

be subject to one of the approved treatments as specified in Annex I to ISPMNo. 15; and

(c)

display a mark as specified in Annex II to ISPMNo. 15, indicating that the wood packaging material has been subjected to an approved phytosanitary treatment]

9.

Wood of Acer saccharum Marsh., including wood which has not kept its natural round surface, other than in the form of:

  • wood intended for the production of veneer sheets; or

  • chips, particles, sawdust, shavings, wood waste or scrap,

originating in the USA or Canada

The wood shall be accompanied by an official statement that it that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage
10.Wood of Acer saccharum Marsh., intended for the production of veneer sheets, originating in the USA or CanadaThe wood shall be accompanied by an official statement that it originates in an area or areas known to be free from Ceratocystis virescens (Davidson) Moreau and is intended for the production of veneer sheets
[F210a.

Wood of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc., other than in the form of

(i)

chips, obtained in whole or part from these trees,

(ii)

wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,

(ii)

wood used to wedge or support non-wood cargo, but including wood which has not kept its natural round surface, originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

The wood shall be accompanied by an official statement that the wood:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

is squared so as to remove entirely the rounded surface]

11.

Wood of Quercus L., other than in the form of:

  • chips, particles, sawdust, shavings, wood waste or scrap; or

  • casks, barrels, vats, tubs or other coopers' products or parts thereof, of wood (including staves) where there is documented evidence that the wood has been produced or manufactured using heat treatment to achieve a minimum temperature of 176°C for 20 minutes,

but including wood which has not kept its natural round surface, originating in the USA

The wood shall be accompanied by an official statement that it:

(a)

is squared so as to remove entirely the rounded surface;

(b)

is bark-free and the water content is less than 20% expressed as a percentage of the dry matter;

(c)

is bark-free and has been disinfected by an appropriate hot-air or hot water treatment; or

(d)

in the case of sawn wood with or without residual bark attached, has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

12.Wood of Platanus L., except that in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in the USA or ArmeniaThe wood shall be accompanied by an official statement that it has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage
13.Wood of Populus L., except that in the form of chips, particles, sawdust, shavings, wood waste or scrap, but including wood which has not kept its natural round surface, originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

is bark-free; or

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter, achieved through an appropriate time / temperature schedule, and there shall be evidence of that kiln-drying by a mark “kiln-dried” or “KD” or another internationally recognized mark, put on the wood or on any wrapping in accordance with current usage

14.

Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from:

  • Acer saccharum Marsh., originating in the USA or Canada,

  • Platanus L., originating in the USA or Armenia, or

  • Populus L., originating in any country of the American continent

The wood shall be accompanied by an official statement that it:

(a)

has been produced from debarked round wood;

(b)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved though an appropriate time/temperature schedule; or

(c)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

[F514a. Isolated bark of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc. originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan and the USA

The bark shall be accompanied by an official statement that the consignment:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

has been processed into pieces of not more than 2.5 cm thickness and width]

15.Wood in the form of chips, particles, sawdust, shavings, wood waste or scrap, obtained in whole or in part from Quercus L. originating in the USA

The wood is accompanied by an official statement that it:

(a)

has undergone kiln-drying to below 20% moisture content, expressed as a percentage of dry matter achieved through an appropriate time/temperature schedule; or

(b)

has undergone an appropriate heat treatment to achieve a minimum core temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export

16.Isolated bark of conifers (Coniferales), originating in any country outside EuropeThe isolated bark shall be accompanied by an official statement that it has undergone an appropriate heat treatment to achieve the minimum temperature of 56°C for at least 30 minutes, the latter to be indicated on the phytosanitary certificate or phytosanitary certificate for re-export
[F616a. Wood in the form of chips obtained in whole or part from Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc. originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

The wood shall be accompanied by an official statement that it:

(a)

originates in an area established by the national plant protection organisation in the country of export as being free from Agrilus planipennis Fairmaire; or

(b)

has been processed into pieces of not more than 2.5 cm thickness and width]

17.

Dunnage, including that which has not kept its natural round, surface, other than in the form of:

  • raw wood of 6mm thickness or less; or

  • wood that has undergone a manufacturing process involving glue, heat or pressure or a combination thereof;

consigned directly from any third country except Switzerland

[F7The dunnage shall:

(a)

from 1st July 2009, be free from bark with the exception of any number of individual pieces of bark if they are either less than 3 cm in width (regardless of the length) or, if greater than 3 centimetres in width, of not more than 50 square centimetres in area;

(b)

be subject to one of the approved treatments as specified in Annex I to ISPM No. 15; and

(c)

display a mark as specified in Annex II to ISPM No. 15, indicating that the wood has been subjected to an approved phytosanitary treatment]

18.Trees, other than fruit or seeds, of conifers (Coniferales), originating in any country outside EuropeWithout prejudice to the requirements in items 19 to 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Pissodes spp. (non-European)
19.Trees, other than fruit or seeds, of conifers (Coniferales), over 3 metres in height, originating in any country outside EuropeWithout prejudice to the requirements in items 18, 20, 21 and 31, the trees shall be accompanied by an official statement that they have been produced in nurseries and that the place of production is free from Scolytidae spp. (non- European)
[F819a. Trees of Fraxinus L., Juglans mandshurica Maxim., Ulmus davidiana Planch., Ulmus parvifolia Jacq. and Pterocarya rhoifolia Siebold & Zucc., intended for planting, other than seeds and plants in tissue culture originating in Canada, China, Japan, Mongolia, Republic of Korea, Russia, Taiwan or the USA

[F9Without prejudice to the requirements in item 19b, the trees shall be accompanied by an official statement] that they:

(a)

have been grown throughout their life in an area free from Agrilus planipennis Fairmaire, established by the national plant protection organisation in accordance with ISPMNo. 4; or

(b)

have, for a period of at least two years prior to export, been grown in a place of production where no signs of Agrilus planipennis Fairmaire have been observed during two official inspections per year carried out at appropriate times, including immediately prior to export]

[F1019b. Trees intended for planting of Fraxinus L. which originate in a third country Without prejudice to the requirements in item 19a, the trees shall be accompanied by a phytosanitary certificate which has been issued by the national plant protection organisation of the country from which the trees originate and which includes under the heading “Additional Declaration” an official statement that the trees have been grown throughout their life in an area which has been established and is maintained as an area free from Chalara fraxinea T. Kowalski (including its teleomorph Hymenoscyphus pseudoalbidus) in accordance with ISPM No 4]
20.Trees, other than seeds, of Pinus L., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18, 19, 21 and 31, the trees shall be accompanied by an official statement that no symptoms of Scirrhia acicola (Dearn.) Siggers or Scirrhia pini Funk and Parker have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
21.Trees, other than seeds, of Abies Mill., Larix Mill., Picea A Dietr., Pinus L., Pseudotsuga Carr. or Tsuga Carr., intended for planting, originating in any third countryWithout prejudice to the requirements in items 18 to 20 and 31, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
[F1121a.Trees intended for planting, including seeds and cones for propagation purposes, of the genera and species referred to in Article 1(2) of Decision 2007/433/EC, originating in any third country

Without prejudice to the requirements in items 18 to 21, 29 and 31 the trees shall be accompanied by an official statement that—

(a)

they originate in a place of production which is registered and supervised by the national plant protection organisation in the country of origin; and

(b)

they meet the requirements of paragraph (a), (b) or (c) of point I of Annex I to Decision 2007/433/EC]

22.Trees, other than fruit or seeds, of Quercus L., originating in the USAWithout prejudice to the requirements in items 23, 24, 31 and 32, the trees shall be accompanied by an official statement that they originate in an area or areas known to be free from Ceratocystis fagacearum (Bretz) Hunt
23.Trees, other than fruit or seeds, of Castanea Mill. or Quercus L., originating in any country outside EuropeWithout prejudice to the requirements in items 22, 24, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Cronartium spp. (non-European) have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
24.Trees, other than seeds, of Castanea Mill. or Quercus L., intended for planting, originating in any third country

Without prejudice to the requirements in [F20items 22, 23, 24a, 31 and 32,] the trees shall be accompanied by an official statement that:

(a)

they originate in an area or areas known to be free from Cryphonectria parasitica (Murrill) Barr; or

(b)

no symptoms of Cryphonectria parasitica (Murrill) Barr have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation

[F1524a.Trees, other than fruit or seeds, of Castanea Mill., intended for planting, originating in any third country

Without prejudice to the requirements in items 23, 24, 29, 31 and 32, the trees shall be accompanied by a phytosanitary certificate or phytosanitary certificate for re-export which states under the rubric “Additional declaration” that they have been grown throughout their life in places of production:

(a)

in countries where Dryocosmus kuriphilus Yasumatsu is not known to occur; or

(b)

in an area or areas established by the national plant protection organisation in the country of origin as being free from Dryocosmus kuriphilus Yasumatsu, in accordance with ISPMNo. 4, and that area shall be mentioned in the phytosanitary certificate or phytosanitary certificate for re-export under the rubric “Place of origin”]

25.Trees, other than seeds, of Platanus L., intended for planting, originating in the USA or ArmeniaWithout prejudice to the requirements in item 31, the trees shall be accompanied by an official statement that no symptoms of Ceratocystis fimbriata f. sp. platani Walter have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
26.Trees, other than seeds, of Populus L., intended of planting, originating in any third countryWithout prejudice to the requirements in items 27, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Melampsora medusae Thümen have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
27.Trees, other than fruit or seeds, of Populus L., originating in any country of the American continentWithout prejudice to the requirements in items 26, 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Mycosphaerella populorum G E Thompson have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
28.Trees, other than seeds, of Ulmus L., intended for planting, originating in any country in North AmericaWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that no symptoms of Elm phlöem necrosis mycoplasm have been observed at the place of production or in its immediate vicinity since the beginning of the last complete cycle of vegetation
29.Trees with roots, planted or intended for planting, grown in the open air, originating in any third countryWithout prejudice to the requirements in items 31 and 32, the trees shall be accompanied by an official statement that the place of production is known to be free from Clavibacter michiganensis ssp. sepedonicus (Spieckermann and Kotthoff) Davis et al., Globodera pallida (Stone) Behrens, Globodera rostochiensis (Wollenweber) Behrens and Synchytrium endobioticum (Schilbersky) Percival
30.

[F18Soil or growing medium that—

(a)

is attached to, or accompanies, trees for the purpose of sustaining the vitality of those trees;

(b)

consists—

(i)

wholly or partly of soil or any solid organic substance such as parts of plants or humus (including peat or bark); or

(ii)

partly of any solid inorganic substance; and

(c)

originates from—

(i)

Belarus, Georgia, Moldova, Russia, Turkey or the Ukraine; or

(ii)

any country outside Europe, other than Algeria, Egypt, Israel, Libya, Morocco or Tunisia]

Without prejudice to the requirements in item 31, the material shall be accompanied by an official statement that:

(a)

at the time of planting it was:

(i)

free from soil and organic matter;

(ii)

found to be free from insects and harmful nematodes and subjected to appropriate examination or heat treatment or fumigation to ensure that it was free from other harmful organisms; or

(iii)

subject to appropriate heat treatment or fumigation to ensure freedom from harmful organisms; and that

(b)

since planting, either

(i)

appropriate measures have been taken to ensure that the growing material has been maintained free from harmful organisms; or

(ii)

within two weeks prior to dispatch, the trees were shaken free from the material leaving the minimum amount necessary to sustain vitality during transport, and, if replanted, the material used for that purpose meets the requirements laid down in paragraph (a)

31.Trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country other than a country in the Euro-Mediterranean area

Without prejudice to the requirements in items 18 to 30 and 32, the trees shall be accompanied by an official statement that they:

(a)

are free from plant debris and from flowers and fruits;

(b)

have been grown in nurseries; and

(c)

have been inspected at appropriate times and prior to export and found to be free from symptoms of harmful bacteria, viruses and virus-like organisms, and either found to be free from signs or symptoms of harmful nematodes, insects, mites and fungi, or have been subjected to appropriate treatment to eliminate such organisms

32.Deciduous trees, other than seeds or trees in tissue culture, intended for planting, originating in any third country, other than a country in the Euro-Mediterranean areaWithout prejudice to the requirements in items 22 to 29 and 32, the trees shall be accompanied by an official statement that they are dormant and free from leaves.
[F2133. Trees of specified plants listed in Decision 2008/840/EC intended for planting, originating in any third country where Anoplophora chinensis (Forster) is known to occur Without prejudice to the requirements in Schedule 4, Part A, items 22 to 29, 31 and 32, the trees shall be accompanied by an official statement certifying that the requirements of paragraph (a) or (b) of point 1 of Part I of the Annex I to Decision 2008/840/EC have been met]

Textual Amendments

F1Words in Sch. 4 Pt. A Item 8 substituted (1.4.2009) by Plant Health (Forestry) (Amendment) Order 2009 (S.I. 2009/594), arts. 1, 2(5)(a)

F7Words in Sch. 4 Pt. A Item 17 substituted (1.4.2009) by Plant Health (Forestry) (Amendment) Order 2009 (S.I. 2009/594), arts. 1, 2(5)(e)

F9Words in Sch. 4 Pt. A Item 19a substituted (29.10.2012 at 18.00) by The Plant Health (Forestry) (Amendment) Order 2012 (S.I. 2012/2707), arts. 1(2)(a), 2(10)(a)

F18Words in Sch. 4 Pt. A Item 30 substituted (21.12.2009) by Plant Health (Forestry) (Amendment) (No.2) Order 2009 (S.I. 2009/3020), arts. 1, 2(4)

F20Words in Sch. 4 Pt. A Item 24 substituted (6.11.2006) by Plant Health (Forestry) (Amendment) Order 2006 (S.I. 2006/2696), arts. 1, 2(7)(a)

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources