The Railways (Interoperability) Regulations 2006

Prospective

Regulation 2(2)

SCHEDULE 6 U.K. (This Schedule reproduces Annex III to the Conventional Directive)

Commencement Information

I1 Sch. 6 in force at 20.3.2006, see reg. 1(2)

ESSENTIAL REQUIREMENTS FOR THE TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM U.K.

GENERAL REQUIREMENTS U.K.

1.1  Safety

1.1.1  The design, construction or assembly, maintenance and monitoring of safety-critical components and, more particularly, of the components involved in train movements must be such as to guarantee safety at the level corresponding to the aims laid down for the network, including those for specific degraded situations.

1.1.2  The parameters involved in the wheel/rail contact must meet the stability requirements needed in order to guarantee safe movement at the maximum authorised speed.

1.1.3  The components used must withstand any normal or exceptional stresses that have been specified during their period in service. The safety repercussions of any accidental failures must be limited by appropriate means.

1.1.4  The design of fixed installations and rolling stock and the choice of the materials used must be aimed at limiting the generation, propagation and effects of fire and smoke in the event of a fire.

1.1.5  Any devices intended to be handled by users must be so designed as not to impair the safe operation of the devices or the health and safety of users if used foreseeably in a manner not in accordance with the posted instructions.

1.2  Reliability and availability

The monitoring and maintenance of fixed or movable components that are involved in train movements must be organised, carried out and quantified in such a manner as to maintain their operation under the intended conditions.

1.3  Health

1.3.1  Materials likely, by virtue of the way they are used, to constitute a health hazard to those having access to them must not be used in trains and railway infrastructure.

1.3.2  Those materials must be selected, deployed and used in such a way as to restrict the emission of harmful and dangerous fumes or gases, particularly in the event of fire.

1.4  Environmental protection

1.4.1  The environmental impact of establishment and operation of the trans-European conventional rail system must be assessed and taken into account at the design stage of the system in accordance with the Community provisions in force.

1.4.2  The materials used in the trains and infrastructure must prevent the emission of fumes or gases which are harmful and dangerous to the environment, particularly in the event of fire.

1.4.3  The rolling stock and energy-supply systems must be designed and manufactured in such a way as to be electromagnetically compatible with the installations, equipment and public or private networks with which they might interfere.

1.4.4  Operation of the trans-European conventional rail system must respect existing regulations on noise pollution.

1.4.5  Operation of the trans-European conventional rail system must not give rise to an inadmissible level of ground vibrations for the activities and areas close to the infrastructure and in a normal state of maintenance.

1.5  Technical compatibility

• The technical characteristics of the infrastructure and fixed installations must be compatible with each other and with those of the trains to be used on the trans-European conventional rail system.

• If compliance with these characteristics proves difficult on certain sections of the network, temporary solutions, which ensure compatibility in the future, may be implemented.

REQUIREMENTS SPECIFIC TO EACH SUBSYSTEM U.K.

2.1  Infrastructure

2.1.1  Safety

• Appropriate steps must be taken to prevent access to or undesirable intrusions into installations.

• Steps must be taken to limit the dangers to which persons are exposed, particularly when trains pass through stations.

• Infrastructure to which the public has access must be designed and made in such a way as to limit any human safety hazards (stability, fire, access, evacuation, platforms, etc.).

• Appropriate provisions must be laid down to take account of the particular safety conditions in very long tunnels.

2.2  Energy

2.2.1  Safety

Operation of the energy-supply systems must not impair the safety either of trains or of persons (users, operating staff, trackside dwellers and third parties).

2.2.2  Environmental protection

The functioning of the electrical or thermal energy-supply systems must not interfere with the environment beyond the specified limits.

2.2.3  Technical compatibility

The electricity/thermal energy supply systems used must:

• enable trains to achieve the specified performance levels;

• in the case of electricity energy supply systems, be compatible with the collection devices fitted to the trains.

2.3  Control and command and signalling

2.3.1  Safety

The control and command and signalling installations and procedures used must enable trains to travel with a level of safety which corresponds to the objectives set for the network. The control and command and signalling systems should continue to provide for safe passage of trains permitted to run under degraded conditions.

2.3.2  Technical Compatibility

• All new infrastructure and all new rolling stock manufactured or developed after adoption of compatible control and command and signalling systems must be tailored to use of those systems.

• The control and command and signalling equipment installed in the train drivers' cabs must permit normal operation, under the specified conditions, throughout the trans-European conventional rail system.

2.4  Rolling stock

2.4.1  Safety

• The structure of the rolling stock and of the links between vehicles must be designed in such a way as to protect the passenger and driving compartments in the event of collision or derailment.

• The electrical equipment must not impair the safety and functioning of the control and command and signalling installations.

• The braking techniques and the stresses exerted must be compatible with the design of the track, engineering structures and signalling systems.

• Steps must be taken to prevent access to electrically-live constituents in order not to endanger the safety of persons.

• In the event of danger, devices must enable passengers to inform the driver and accompanying staff to contact him.

• The access doors must incorporate an opening and closing system which guarantees passenger safety.

• Emergency exits must be provided and indicated.

• Appropriate provisions must be laid down to take account of the particular safety conditions in very long tunnels.

• An emergency lighting system of sufficient intensity and duration is compulsory on board trains.

• Trains must be equipped with a public address system which provides a means of communication to the public from on-board staff and ground control.

2.4.2  Reliability and availability

The design of the vital equipment, of the running, traction and braking equipment and of the control and command system must be such as to enable the train to continue its mission, in a specific degraded situation, without adverse consequences for the equipment remaining in service.

2.4.3  Technical compatibility

• The electrical equipment must be compatible with the operation of the control and command and signalling installations.

• In the case of electric traction, the characteristics of the current-collection devices must be such as to enable trains to travel under the energy-supply systems for the trans-European conventional rail system.

• The characteristics of the rolling stock must be such as to allow it to travel on any line on which it is expected to operate.

2.4.4  Controls

Trains must be equipped with a recording device. The data collected by this device and the processing of the information must be harmonised.

2.5  Maintenance

2.5.1  Health and safety

The technical installations and the procedures used in the centres must ensure the safe operation of the subsystem and not constitute a danger to health and safety.

2.5.2  Environmental protection

The technical installations and the procedures used in the maintenance centres must not exceed the permissible levels of nuisance with regard to the surrounding environment.

2.5.3  Technical compatibility

The maintenance installations for conventional rolling stock must be such as to enable safety, health and comfort operations to be carried out on all stock for which they have been designed.

2.6  Operation and traffic management

2.6.1  Safety

• Alignment of the network operating rules and the qualifications of drivers and on-board staff and of the staff in the control centres must be such as to ensure safe operation, bearing in mind the different requirements of cross-border and domestic services.

• The maintenance operations and intervals, the training and qualifications of the maintenance and control centre staff and the quality assurance system set up by the operators concerned in the control and maintenance centres must be such as to ensure a high level of safety.

2.6.2  Reliability and availability

The maintenance operations and periods, the training and qualifications of the maintenance and control centre staff and the quality assurance system set up by the operators concerned in the control and maintenance centres must be such as to ensure a high level of system reliability and availability.

2.6.3  Technical compatibility

Alignment of the network operating rules and the qualifications of drivers, on-board staff and traffic managers must be such as to ensure operating efficiency on the trans-European conventional rail system, bearing in mind the different requirements of cross-border and domestic services.

2.7  Telematics applications for freight and passengers

2.7.1  Technical compatibility

• The essential requirements for telematics applications guarantee a minimum quality of service for passengers and carriers of goods, particularly in terms of technical compatibility.

• Steps must be taken to ensure:

  • that the databases, software and data communication protocols are developed in a manner allowing maximum data interchange between different applications and operators, excluding confidential commercial data;

  • easy access to the information for users.

2.7.2  Reliability and availability

The methods of use, management, updating and maintenance of these databases, software and data communication protocols must guarantee the efficiency of these systems and the quality of the service.

2.7.3  Health

The interfaces between these systems and users must comply with the minimum rules on ergonomics and health protection.

2.7.4  Safety

Suitable levels of integrity and dependability must be provided for the storage or transmission of safety-related information.