Search Legislation

The Public Contracts Regulations 2015

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: Section 31

 Help about opening options

Changes to legislation:

The Public Contracts Regulations 2015, Section 31 is up to date with all changes known to be in force on or before 14 May 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to Regulation 31:

Changes and effects yet to be applied to the whole Instrument associated Parts and Chapters:

Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):

  • reg. 6(15A) words omitted by S.I. 2023/506 reg. 2(3)(a) (This amendment not applied to legislation.gov.uk. S.I. 2023/506 revoked before coming into force by The Public Procurement (International Trade Agreements) (Amendment) (Wales) (No. 2) Regulations 2023 (S.I. 2023/567), regs. 1(2), 6)
  • reg. 10(1)(d)(i)(aa) words substituted by S.I. 2019/560 reg. 5(9)(a)(i) (This amendment not applied to legislation.gov.uk. Affecting Regulations revoked (20.11.2020) by S.I. 2020/1319, regs. 1(3), 2(a))
  • reg. 10(1)(d)(i)(bb) words substituted by S.I. 2019/560 reg. 5(9)(a)(ii) (This amendment not applied to legislation.gov.uk. Affecting Regulations revoked (20.11.2020) by S.I. 2020/1319, regs. 1(3), 2(a))
  • reg. 18(4) words omitted by S.I. 2023/506 reg. 2(4) (This amendment not applied to legislation.gov.uk. S.I. 2023/506 revoked before coming into force by The Public Procurement (International Trade Agreements) (Amendment) (Wales) (No. 2) Regulations 2023 (S.I. 2023/567), regs. 1(2), 6)
Innovation partnershipU.K.
This section has no associated Explanatory Memorandum

31.—(1) In innovation partnerships, any economic operator may submit a request to participate in response to a contract notice by providing the information for qualitative selection that is requested by the contracting authority.

(2) In the procurement documents, the contracting authority shall—

(a)identify the need for an innovative product, service or works that cannot be met by purchasing products, services or works already available on the market, and

(b)indicate which elements of this description define the minimum requirements to be met by all tenders.

(3) The information provided under paragraph (2) shall be sufficiently precise to enable economic operators to identify the nature and scope of the required solution and decide whether to request to participate in the procedure.

(4) The contracting authority may decide to set up the innovation partnership with one partner or with several partners conducting separate research and development activities.

(5) The minimum time limit for receipt of requests to participate shall be 30 days from the date on which the contract notice is [F1submitted].

(6) Only those economic operators invited by the contracting authority following the assessment of the information provided may participate in the procedure.

(7) Contracting authorities may limit the number of suitable candidates to be invited to participate in the procedure in accordance with regulation 65.

(8) The contracts shall be awarded on the sole basis of the award criterion of the best price-quality ratio in accordance with regulation 67.

(9) The innovation partnership shall aim at the development of an innovative product, service or works and the subsequent purchase of the resulting supplies, services or works, provided that they correspond to the performance levels and maximum costs agreed between the contracting authority and the participants.

(10) The innovation partnership shall be structured in successive phases following the sequence of steps in the research and innovation process, which may include the manufacturing of the products, the provision of the services or the completion of the works.

(11) The innovation partnership shall set intermediate targets to be attained by the partners and provide for payment of the remuneration in appropriate instalments.

(12) Based on those targets, the contracting authority may decide after each phase to—

(a)terminate the innovation partnership, or

(b)in the case of an innovation partnership with several partners, reduce the number of partners by terminating individual contracts,

provided that the contracting authority has indicated in the procurement documents those possibilities and the conditions for their use.

(13) Subject to the following provisions of this regulation, contracting authorities shall negotiate with tenderers the initial and all subsequent tenders submitted by them, except for the final tender, to improve their content.

(14) The minimum requirements and the award criteria shall not be subject to negotiation.

(15) During the negotiations, contracting authorities shall ensure equal treatment of all tenderers and, to that end—

(a)they shall not provide information in a discriminatory manner which may give some tenderers an advantage over others;

(b)they shall inform all tenderers whose tenders have not been eliminated under paragraph (18), in writing, of any changes to the technical specifications or other procurement documents, other than those setting out the minimum requirements; and

(c)following any such changes, contracting authorities shall provide sufficient time for tenderers to modify and re-submit amended tenders, as appropriate.

(16) In accordance with regulation 21, contracting authorities shall not reveal to the other participants confidential information communicated by a candidate or tenderer participating in the negotiations without its agreement.

(17) Such agreement shall not take the form of a general waiver but shall be given with reference to the intended communication of specific information.

(18) Negotiations during innovation partnership procedures may take place in successive stages in order to reduce the number of tenders to be negotiated by applying the award criteria specified in the contract notice, in the invitation to confirm interest or in another procurement document.

(19) In the contract notice, the invitation to confirm interest or in another procurement document, the contracting authority shall indicate whether it will use the option described in paragraph (18).

(20) In selecting candidates, contracting authorities shall in particular apply criteria concerning the candidates' capacity in the field of research and development and of developing and implementing innovative solutions.

(21) Only those economic operators invited by the contracting authority following its assessment of the requested information may submit research and innovation projects aimed at meeting the needs identified by the contracting authority that cannot be met by existing solutions.

(22) In the procurement documents, the contracting authority shall define the arrangements applicable to intellectual property rights.

(23) In the case of an innovation partnership with several partners, the contracting authority shall not, in accordance with regulation 21, reveal to the other partners solutions proposed or other confidential information communicated by a partner in the framework of the partnership without that partner's agreement.

(24) Such agreement shall not take the form of a general waiver but shall be given with reference to the intended communication of specific information.

(25) The contracting authority shall ensure that the structure of the partnership and, in particular, the duration and value of the different phases reflect the degree of innovation of the proposed solution and the sequence of the research and innovation activities required for the development of an innovative solution not yet available on the market.

(26) The estimated value of supplies, services or works shall not be disproportionate in relation to the investment required for their development.

Textual Amendments

Back to top

Options/Help

Print Options

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources